Do you know why the high pressure washer machines are being the best washer in the cleaning industry?

Guide on using a High-pressure washer in a right way

As surprising as it may seem, this is one of the most common questions we get from car washing businesses on using high pressure washer machines. Whether pressure washing is done to remove dust and dirt, as part of standard maintenance, or to get a car ready for detailing, knowing how to power wash help to avoid a series of problems, such as water infiltration, excessive erosion leading to accelerated wear and tear, and localized damage. This guide will be discussing on how to use a pressure washer in the right way.

The working process of a High Pressure Washer

Know all about pressure washing equipment: Before beginning the actual job, it is vital to read the instruction booklet and test the machine in a small area of the car. Because a pressure washer's scouring action is so powerful, you risk damaging paint, walls, and sensitive surfaces if you don't know how to operate it properly.

Learn how to adjust its pressure: Keep the pressure between 1500 psi and 1800 psi to wash away debris, road salt, dust, and dirt. To remove loose paint, gradually increase the pressure but do not exceed 2500 psi; too much pressure may harm the surface.

Choose the right nozzle: While using a high pressure washer on the exterior of a vehicle, wide-fan nozzles are frequently used. While most professionals use yellow (15-degree) or green (25-degree) fan nozzles, white (40-degree) nozzles can be used to wash sensitive automotive regions, and black (65-degree) nozzles are preferable if you want to mix water with chemicals.

Go for eco-friendly cleaning products: Choose an all-purpose product that is eco-friendly and has a low environmental impact. Apply the solution to one area, let it soak for five minutes, and then thoroughly rinse with the pressure washer before moving on to the next.

Hold the nozzles at a 45-degree angle to avoid damage to the car surface: Maintain the boom at a 45-degree angle to avoid harming the walls, keep the nozzle of a high pressure washer at a 45-degree angle and spray from a distance of at least 12 inches. Increase the pressure by moving the nozzle away from the surface.

 

Seal the watermark with water repellent product: Allow the car surface to dry completely before inspecting them. If water stains remain after 24-48 hours, use a water-repellent compound to guarantee proper waterproofing and avoid future moisture problems.

Summary

 

Using the pressure washer is not easy, especially if you are a novice, so the upper mention guide will help you to know about the steps to use a high pressure washer. However, if you are looking for these equipment you can connect with Manmachineworks & explore a range of pressure washers that are best in a market that also at a pocket-friendly rate.