Have you ever notice that we are actually using a car washer in the wrong way.

How to use the car washer in the best way?

One of the top ways to use the pressure washer or car washer machine is to use it with the right chemicals such as car wash shampoo, degreaser shampoo, and so on. Certainly, the question here is to know how much amount of chemical cleaner is enough without damaging the pressure pump!
​The problem with putting the chemicals directly into the tank is that it may cause the pump to oxidize. That’s why it’s better to use a washer downstream chemical injector to do this job.

How to Use Downstream Chemical Injector

The downstream chemical injector is injected into the pressure side of the pump. The main variance between a downstream injector and an upstream one is that because of this distinguishing, it doesn’t need a vacuum to bring the detergent to the tank. On the other hand, the upstream type does require a vacuum.

​Having said that, it’s essentially safer for the pressure washer if you use a downstream chemical injector type.

Insert the Injector

1st know where to insert the injector. As stated above, you place it in the pressure side of the washer. In order to do that, you primarily attach the quick couplers to the ends of the injector. Then, connect it to the connector amid the pressure hose and power washer. Take note though that the process will change if you are using hot water. In such a case, insert the injector in the hose reel area. This will safeguard that none of the pressure washer parts will be affected by the harsh chemicals that you’ll put in.

Permitthe Vacuum Effect to Work:

​Once the injector has already been placed, now you’ll need to wait for it to take effect. These injectors push the liquid inside the injector out and into the vacuum through good pressure. At the same time, you’ll also want to use a low-pressure nozzle to help the detergent moving.

Take Note of Things:

​This is basically what will happen when you insert the injector to your pressure washer. So, do take note that there are a few things that can stop the injector from working appropriately. Initially, if you use a high-pressure nozzle, so you may want to avoid doing that. Next is applying extra pressure using the pressure hose. If you do this, expect there to be a lot of struggle that will keep the water from going through the hose. Finally, the backpressure will just push back the water to the injector. So, these are the two things that you may want to remember when using your injector. These two conditions will stop the injector from working. Consequently, if you want it to continue functioning properly, remember to avoid these two situations.

It is in fact, fairly easy to work an injector. All you need to do is follow the first step and wait. You also need to observe some of the situations wherein you may make the injector stop working and avoid them. These steps are fundamentally essential to use the car washer machine.

To book or enquire more: Visit: https://www.manmachineworks.com/ or 

call: +91 8252-300-400