Car washing pump is one stop solution to the traditional equipment; a hose pipe that worked slower than the government, a bucket of water filled with small pebbles that made their way on one car or another. To put an end to all that unnecessary clutter, came in the pump that took care of all that. Car wash hindquarters are often found to greasy, full of machine parts, socket and wrenches, dirty mops and the floor is always wet or has tire marks. You’ll seldom find one that’s really clean, orderly, and presentable. There’s just too much equipment straddling in a small space, leading to haphazard layouts, tangles of tubing and plumbing lines, and a general feeling of clutter and disorganization.
Here is a solution, a machine that is functioning in dozens of high-performance car washing units, around the country.
Install the washing pump & save loads of time
The pump which is exclusively made by Annovi Reverberi and imported to India all the way from Italy. The foreign technology has proven to enhance many car washing outlets and service stations. The very idea of saving something is very lucrative to Indians.
- As the pump has Ceramic Pistons installed in it and they run on the highest speed to provide the pressure of over 100 bars, the pump withstands it. Irrespective of any hose is attached to it.
- The pump’s flow rate is lesser than 12 1/min, 3.20 gpm. This is the main reason behind saving water.
- The RPM i.e. Revolutions per minute is 1450 N Degree giri/1''; this dictates the speed of the machine. Which in turn generates good speed to provide high pressure for washing. Thus, a great number of space can be covered while spraying in the water.
Here are some key USPs (user selling points) of the pump:
- Efficient and Affordable.
- Compact and Strong Body.
- Easy to Use.
- Powerful Performance.
- Made with innovative technology.
- Appropriate for car, truck and tractor wash.
Usually any pressure car washer contains pump, motor and water storage. When the machine is switched on, the motor will power the respective pump. This exerts or forces the water through the concentrating nozzle at the high pressure. The water force further blasts away the layered dirt, dust, grimes and other sort of contaminants from the surface of vehicles. Using the pressure washer can easily be helpful in washing of the vehicles surface in less time in comparison to the time that you waste on scrubbing the surface using soap, brush and water.
The pump use the Italian technology of not wearing out soon. With the highly advanced know how the machine can adapt to work with every pressure. This enables the high-pressure to be used to clean the under body, to rinse of the foam and shampoo, to get off any stubborn grime or grease stains. The pump is a highly dependable and advanced solution for a quick and efficient car wash. The washer comes in many forms and makes.
To know more about car washing pump or other flawless machines, you can visit Manmachineworks
No comments:
Post a Comment