How to use the Car wash machine to Maximise profits

A recent survey was taken on the 10 most Influential Businessmen of the Automobile Industry in India showed that they wished that the output of the machines used in their service stations could be maximized. As they felt that their machines were underutilized. All machines have their limited life-span be it a car or a car wash machine. To get the most out of them is totally up to the user.

Every new machine takes it sweet time to run to course. You may notice that at times, the new machine may not run as effectively as it does after being used 8-10 times. It’s the nature of every machine to get into its original speed and working after a few uses.

Get the best results with the Automatic Car washer

The automatic car washing machine is one such machine that has been designed and upgraded a lot over the years. The automatic car washing concept goes back to the 1930s. When the Conveyors with moving tracks were installed and cars were pulled through a tunnel with an overhead water sprinkler, manually operated brushes and a blower for drying.

With years of exhaustive research and development, the machine has come to the stage where 1 car is washed within 4-5 minutes. In which the car is washed off its dirt and mud, then shampooed, then scrubbed with the rolling brushes, rinsed, and then dried too.

One of the most demanded automatic washers in the Indian market is the M1:

• On the M1, the traditional hydraulic circuits have been replaced by locating the different rinsing, shampoo, and foam nozzles at specific points, which means that the product is applied with pinpoint accuracy and thus with minimum water consumption.
• As with all other rollovers, electricity consumption is important. Accordingly, the dryer comprises 4 turbines with 3 kW motors, giving a total of 12 kW of power.
• The transducers used to measure the consumption of the brush spin motors are the essential elements of control. To ensure the perfect wash of any type of vehicle, the M1 does an overlapping wash on the front and rear of the vehicles.
• Unlike the pneumatic brush travel systems normally used on low-cost wash ranges, the M1 includes as standard, a brush travel system powered by motors to ensure that the system works perfectly.

Another car washing machine that is making head-way is the Steamjet and Wax Machine:

• The Wash & Wax as a single potent action forces out the tiniest dust and sand particles off the car with high-pressure steam.
• The moisture element flows down to pick up the residues off the surface.
• The wax mixing device sprays warm wax to the car surface leaving coating was as wipe off the moisture.
• This lasts up to 8 times longer than a conventional car wash.

Whenever one decides to invest in the car washing business or wish to upgrade their old ones, one should definitely consider the above-mentioned car wash machine. The car washer machine can pose a gamble, one must be fully equipped to work with the advanced technology.

To enquire about more car washer machines or place an order for one; Visit: https://www.manmachineworks.com/ or call: +91 7827954678.

The Unheard Praises of the Car Washing Pump

Car washing pump is one stop solution to the traditional equipment; a hose pipe that worked slower than the government, a bucket of water filled with small pebbles that made their way on one car or another. To put an end to all that unnecessary clutter, came in the pump that took care of all that. Car wash hindquarters are often found to greasy, full of machine parts, socket and wrenches, dirty mops and the floor is always wet or has tire marks. You’ll seldom find one that’s really clean, orderly, and presentable. There’s just too much equipment straddling in a small space, leading to haphazard layouts, tangles of tubing and plumbing lines, and a general feeling of clutter and disorganization.

Here is a solution, a machine that is functioning in dozens of high-performance car washing units, around the country.

Install the washing pump & save loads of time

The pump which is exclusively made by Annovi Reverberi and imported to India all the way from Italy. The foreign technology has proven to enhance many car washing outlets and service stations. The very idea of saving something is very lucrative to Indians.

• As the pump has Ceramic Pistons installed in it and they run on the highest speed to provide the pressure of over 100 bars, the pump withstands it. Irrespective of any hose is attached to it.
• The pump’s flow rate is lesser than 12 1/min, 3.20 gpm. This is the main reason behind saving water.  
• The RPM i.e. Revolutions per minute is 1450 N Degree giri/1''; this dictates the speed of the machine. Which in turn generates good speed to provide high pressure for washing. Thus, a great number of space can be covered while spraying in the water. 

Here are some key USPs (user selling points) of the pump:

• Efficient and Affordable. 
• Compact and Strong Body. 
• Easy to Use. 
• Powerful Performance. 
• Made with innovative technology. 
• Appropriate for car, truck and tractor wash.

Usually any pressure car washer contains pump, motor and water storage. When the machine is switched on, the motor will power the respective pump. This exerts or forces the water through the concentrating nozzle at the high pressure. The water force further blasts away the layered dirt, dust, grimes and other sort of contaminants from the surface of vehicles. Using the pressure washer can easily be helpful in washing of the vehicles surface in less time in comparison to the time that you waste on scrubbing the surface using soap, brush and water.
 

The pump use the Italian technology of not wearing out soon. With the highly advanced know how the machine can adapt to work with every pressure. This enables the high-pressure to be used to clean the under body, to rinse of the foam and shampoo, to get off any stubborn grime or grease stains. The pump is a highly dependable and advanced solution for a quick and efficient car wash. The washer comes in many forms and makes.  
 

To know more about car washing pump or other flawless machines, you can visit Manmachineworks

Detailed insights on the Car Wash Equipment

Let’s throw some light on the equipment that is used in the car washing service stations. These machines are hand-picked and selected for their unique features. Thus, they need to be thoroughly understood properly.The machines and tools manufactured and introduced in the market for the usage of car washing have their set functions. Some machines may have more advanced ones than the others, while some of them might have more features and functions. The key is to identify the right one.

Which machines are worth trying!

 

 

The Professional Hot & Cold-Water High Pressure Washer: As we already know that this machine has ACDS (Advanced Control with Delayed Stop Mechanism); which makes it Time-saving and an Efficient Machine.

• 4-in-1: This machine has a unique Four-fold feature: Hot Water Wash, Cold Water Wash, Steam Wash and Foam Wash. All of these remarkable features are clubbed into a Compacted design.
• The Hot water comes at 30-80° while the Steam is generated at 80-140°. This feature makes the machine a reliable one. With such capability, accidents related to hot water or steam leaking can be dodged.
• One brilliant feature of this machine is that it has an accessory called the Twin Foam Lance. There is no need to change or remove it and by just rotating it Clock-wise and Anti-clock-wise, one can choose between Foam and Steam options. This saves a good amount of time.
• The Hot and Cold High Pressure Washer shuts down after the 20-minute mark when ideally sitting.
• One positive feature is that it has a Greenlight on Top. If the light is switched on then the machine is working fine. If the light starts to blink, then there may be a problem. At which point, the machine needs to Shut-down at once.

The Car Polisher: The car polishing machines not only polish the surface of the paint body but also buff away scars and scratches. For any further car detailing activities or application of any products, the polishing and buffing stage has to be done right. Or else those scratches will still be visible and after a protective layer like the paint protection film, it will impossible to do something about it. The most commonly used polisher in the market is the rotary one, it moves in a circular motion and covers less ground. We know an upgrade to it: 

• The ZENTOOL Dual Action Polisher: As the name suggests, it has dual features. This means that compared to rotary polisher this machine achieves a far superior finish with no holograms. Rotary polisher can cut easily but leaves too many paint defects. Painters use compounds containing fillers to mask these defects. This machine works in an orbital throw motion and thus covers more space. This machine has shown great results and thus very much in demand. 

The car wash equipment available in today’s Indian automotive market needs to be studied and after an exhaustive research, should be invested in. One must roll-up their sleeves to find the needle in the hay stack.

The Steam Car Washer is idyllic for cleaning Engines

The steam car washer is such a machine that has been handed down from the future for the automotive industry to wash and clean the cars with precision. Most parts of the car can not be treated as the normal ones, they are only tended by the steam wash machine. Like the engine, the plastic parts that are too delicate, the internal combustion, and so on.

Among many car washing machines, the steam washer is the most demanded and researched on, machine. Thus, one must stay up-to-date in regards to the latest models, their workings, their features, other models doing the same thing, and so on.

What does the steam washer exactly do?  

The steam jet wash and wax machine is one such appliance that can be used within short intervals for various washes through-out the day. As mentioned in one of our earlier blogs, this machine will be in all car washing outlets and service stations in the future.

As this machine not only generates enough steam to melt away the stubborn oil and grease stuck inside the engine, but also removes it completely.

The steam generating machines are taking the place of the high-pressure washers in many outlets. This allows the car washers to finish the washing task within half the time. Also, to ensure that the cleaning part is done adequately.

This promptness of the machine enables the steam wash to be so successful. Most of the car washing outlets nowadays are getting more and more demands from customers for getting the steam wash of the entire car done.

The Steam Poseidon: It symbolizes the technology developed by ELSEA steam machines.

• Designed to obtain a steam supply in continuous use with maximum working pressure up to 9 bar, its working efficiency is guaranteed by a powerful suction unit with two two-stage motors.

• Best for the automotive sector.

• Ideal for the cleaning and food sectors as well.

• Is equipped with the "detergent dispensing with separate compartment" function.

The steam Poseidon is such a machine that can be called a Multi-purpose machine.

Steam washers help to degrease the engine, the tires, and the painted body. The steam machine is used primarily to clean the engines, that thing has been made clear. But why?

The engine also attracts dust and dirt. These, too, can be easily washed away by the steam without causing any harm to the engine.

The steam car washer is one such machine that when maintained and taken care of, will last longer than most other car wash equipment. The car washing session has to be quick, effective, and satisfying. For that to happen, the machines, the manpower both have to work promptly. If the machines work adequately and the staff knows how to use the machine to its full capacity, only then the car wash session will be successful.

For enquires or invest in any of the car washing machines; Visit: https://www.manmachineworks.com/ or call: +91 7827954678.

Know your Car Wash equipment and how it works

A smart businessman or investor makes it an effort to know the ins and outs of the car wash equipment, the machinery, the infrastructure, the manpower, and so on. The better you research on and know about, the better the output will be. For this to happen, one must know what’s under the hood and what its features are. One can’t just spend a good amount of money and get what’s trending. Each outlet or service station may have different needs for the machinery. As it will decide how the further workings will be. The equipment or tools used for an efficient car washing, may come in many makes and brands. The right fit will make the difference.

What machines Qualify as good in the industry?

The machinery or the equipment has a very wide definition and thus one mustn’t just pick up the one they see first.

1. Vacuum Cleaners: This machine has been in use for getting the upholstery and carpet of the car cleaned since its inception. This means that there may be many in the market, but which to choose?

EXCEL M – 77/2: Ideal for professional cleaning, with two double stage motors reaching up to 2600w of maximum power. This model has an easy handle to push around and wheels on d bottom to do the job with lesser time as promised.

Three Phase Industrial Vacuum Cleaner: Ideal for intensive and continuous uses. Equipped with a 3.0kw THREE-PHASE Turbine.

Features & Benefits: Hose made up of Virgin Polypropylene which is highly unbreakable. Comes complete with two hoses of 5 metre each with Y-shape connector. Can be run for complete day operation with heavy-duty turbine can be easily moved from one place to other thanks to lockable castors. Supplied with special car tool for ease & faster Vacuuming.

2. The Steam Poseidon: Designed to obtain a steam supply in constant use with the maximum working pressure up to 9 bars, its working efficiency is guaranteed by a powerful suction unit with the two two-stage motors. Ideal in the automotive sector, it is also used in the cleaning and food sectors, complying with HACCP self-control regulations. In addition to the steam and suction-steam function, the Steam car washer is equipped with the "detergent dispensing with separate compartment" function.

3. Gladius Car polishing Machine: Gladius R56 is a strong rotating polisher with 150mm large mounting plate. This is a machine that should be used when it comes to proper rough polishing on scratched cars. Rotating is difficult when it comes to worn lacquers that require proper handling. It creates more heat and more friction than an oscillating machine and thus can pull rougher scratches in the paint. Another advantage of rotating is that they are completely vibration-free. However, this machine requires a little more from its users than an oscillating machine does and preferably one should drive at least one step behind with the oscillating machine to avoid holograms.

The car wash equipment can include a lot many machines as well. That depends on the outlet and its size and space. The best way to determine what machinery is required, is to identify the basic usage and then go for it.

To learn more about these machines & other, please visit us here https://www.manmachineworks.com/   

The upgraded version of the Car washing pump must be tried

The car washing pump is such a machine which generates a high-pressure of water to be used for many purposes. Such as car washing, tractor or truck washing, etc. The machine is attached to the water source and then used to spray water on the car. Another attachment can also be added to this pump like the shampoo bottle. This piece of machinery may seem simple but is loaded with many features.

Features and Benefits of the Car Washing Pump

 

• The washing pump is just another name for the high-pressure washer and also called the car washer in simpler terms. But has many upgraded features as well.
  

• It has come a long way from the conventional method of washing: The hand pipe that was famous for wasting water and hence money. As its flow rate was more and the pressure was less. Also, it either washed in a smaller angle or the pencil jet which meant, at a single time, the smaller proportion was covered. This may work for the underbody chassis but not for the entire car.

• The foam bottle can be attached, which means that after water is poured on the car to clean it, then the foam bottle can be attached directly to the nozzle and shampoo can be sprayed at the same pressure and angle. The more the angle, the more area will be covered.
  

• 3 Pistons usually come in one washing pump, that increases the speed of the pressurised water. This means that more pressure will be formed and less flow rate, which will result in water savage.

• Good life span: This machine has an iron-cast body and brass head which makes it a long-running machine. This machine can easily go on for more than a decade or even more if regularly maintained.

High PPM speed: The revolution per minute is high in this pump than most others in the pump. The Annovi reverberi pump is a very adequate in its workings.

The pump comes in many makes and works accordingly. Like the HRC pro can wash up to 15-20 cars per day.

• Efficient and Affordable.
• Compact and Strong Body.
• Easy to Use.
• Powerful Performance.
• Made with innovative technology.
• Appropriate for car wash.
• RPM: 1450 N Degree giri/1''.
• Flow rate: 12 1/min, 3.20gpm.
• Pressure: 100 bars.
  

While this model is very adequate, there are many more models in the market. One can choose and pick as per their budget and efficiency of the other car wash equipment under the hood. This enables to make a correct choice and then get the maximum output.

The HRG-pro 21:15 can go on all day and not break a sweat. This pump has a flow rate of 21 L/M and a pressure of 150 bars. This model has a good standing in the industry and has reported working for the longest of time without any heating up. The car wash equipment consists of many more machines that combine into a car washing outlet.

Steam Washer Machines help the Engine the most

The steam washer machine is used mainly to clean the engines but is also used to steam wash all the plastic parts and the interiors as well. Degreasing the engine from any extra grease or oil leaks is one of the fortes of this machine. As the engine also attracts dust and dirt. These, too, can be easily washed away by the steam without causing any harm to the engine.

Basic Understanding of the Steam Car Washer

There are two models of the steam wash machine that are currently in demand. Let’s throw some light on them:

1. The Steam Jet Wash & Wax Machine: It's the only machine in the world with patent technology that can spray steam and wax simultaneously.

· Can generate high-pressure steam above 8 bar or pressure within 1 minute.

· The Wash & Wax as a single potent action forces out the tiniest dust and sand particles.

· The moisture flows down to pick up the residue off the surface.

· The Steam jet Wax lasts up to 8 times longer than the conventional car wash.      

     2. The Steam Poseidon: It expresses all the technology and development of ELSEA steam machines. Designed to obtain a steam supply for continuous use with maximum working pressure up to 9 bars, its working efficiency is guaranteed by a powerful suction unit with two two-stage motors.

· Idyllic in the automotive sector.

· Used in the cleaning and food sectors.

· Is equipped with the "detergent dispensing with separate compartment" function.

· The steam Poseidon is such a machine that can be called a Multi-used machine.

These steam jet wash and wax machines are user-friendly and their main selling point is that their investment can be earned back within the 1^st year. These machines are used strongly and still do not heat-up. Many workshops and car washing outlets who have purchased the steam wash machine have reported them to work more resourcefully than more expensive ones in the market.

The heated steam lifts or melts the filth off of cars while remaining safe for use. The engine is the main user of these steam car washers. Let’s understand one simple point, that where water cannot clean, the steam washer does the trick.

One of the strong suits, this steam wash machine has is that it can sanitize the car inside-out. As one can decide what to put in the tank and then have it sprayed on the car. In fact, there are many products in the market, that can be used with this machine to get the desired washing or spraying.

The steam car washers do not consume much electricity, and they can be dragged from one place to another with their easy wheels. And the water consumption, too, can be controlled as per the usage. The steam function of these machines enables cleaning the leather seats as well.

The steam wash saves a good amount of energy and can be used on every automobile. Many advanced service stations and car washing outlets use this machine to clean the car, thoroughly. From the engine to the plastic body parts to the interiors, each part can be cleaned. This machine doesn’t just let out the steam and to impress the customer, it really does clean the surface. This is the new washer of the future.

To enquire about a steam car washer and machine; Visit: https://www.manmachineworks.com/ or Call: +91-80-100-44000. 

Top Features of the High pressure Washer

The high pressure washer is one such machine that can liberate 130, 140 and even 200 bars by the Annovi Reverberi car washing pump. As such high water beam can damage the car’s paint and glass, that’s why the pump controls it. At the max. 10-20 bars is let out from the lance to the car. Which is ideally 15-30 cm.

Many people, even the car wash outlet owners, are under the impression that such high water pressure can be let out on the car directly. This is complete ruse, as it will damage the paint and may even cause a dent. Such water pressure can also hurt the person’s foot, if he wears open sandals or slippers. Hence, it is vital to wear closed-toed shoes at all times, while the washer is on.

What makes the Pressure Washer Useful?

• The pump of the washer is made of cast-iron and has a brass head: This makes the car washing pump heat absorbent instead of the other way around.  
• The Ceramic Pistons also help to control the heat generated from the rigorous working of the washer. Even if the machine is used for one task after the other, the washer will not shut down or heat up on its own.
  

Many companies save cost and use the ceramic coated ones, who then later complain that they have ruined the machine sooner than expected.

• Tapered bearing rollers are the individual rolls inside the pressure washer. Unlike others who have ball-bearings, that can come loose after a few jobs. 
  
• Crankshaft Technology: The crankshaft is the newest technology in the automotive industry. This has helped many machines to sustain for the longest of time.
  

- Makes the pressure-washer less noisy.
- Minimum vibration.
- Good life-span of the Washer.
- High RPM (revolution per minute).

The machine also comes in the Hot and Cold h.p.washer. Which can be switched to hot or cold water as per the use. This allows the car washer to switch easily and perform the wash adequately.

The pump comes in many models:

• The HRC-pro: CAR WASH CAPACITY OF 15 - 20 CARS IN 1 DAY.
• The HRK-pro: CAR WASH CAPACITY OF 25-30 CARS IN 1 DAY
• Single-Phase High Pressure BC-780: Up to 10 cars/day.
• Single- Phase Washer AR-613: 4-5 cars per day.
• HRG-pro: All day running machine.
  

The washer is basically used to wash cars, trucks, tractors, boats, any machine that can withstand the minimum pressure of 10-20 bars. The washer machine can also be used to spray shampoo on the car. As an attachment, the foam bottle can be attached and the nozzle can spray the shampoo or foam directly on the vehicle. This allows the machine to be termed as ‘multi-used’ one. After, the scrubbing and mopping, the machine can then be turned on again to rinsed off.

The high pressure washer is one such ever-lasting machine that can be used of over a decade and might still not post any complaints. If one really wished to invest in the machinery then they should consider the HRG-pro.

Top 8 Benefits of the Car Washing Pump

The equipment and tools used in the car wash outlets or service stations, all have their unique features and adequate reasons to be used. The high-pressure washer, the car polishing machines, the car washing pump, the steam washer and so on, these machines are used in the car washing procedure. Thus, if one is owning them or planning to invest in them, then the features, user selling points, their benefits, their usage and all, must be well-studied.

Straightforward Features:

Water Saving: Many local washing pumps in the market may claim this point, but once you purchase them and then start using them, then their hidden drawbacks come up. They use up to 200 litres of water only on one car. While the Annovi Reverberi Pump claims and uses up to 6 litres of water. We think that is a huge savage. Car Washer machines are designed in a way to use maximum water to get even the dirtiest car cleaned. But if one wishes to save some bucks on the waterfront, then one has to consider the European option.
 

Electricity Savage: Apart from water, electricity is another feature that needs a complete control. As the machines used in car washing, demand great amount of electricity. This ends up costing more than one makes. So, in order to control this part, one must choose such a pump that has a separate line and fuse box to be turned off as soon as the machine is not in use. 

Compact Design: If you have researched in the market, then you might have seen those local pumps that have the plunger design. That takes up a lot of space. While the European made Annovi pump is compact and doesn’t require much space.
 

Less Noise: Due to the ceramic pistons installed in the pump, noise coming from the machine is reduced and sometimes not at all. Ceramic pistons are different from the ceramic coated ones, as the coated ones heat up sooner. And as a result, they start making the irritating noise.
 

Life-span: The Annovi pumps have a bras head and an iron-cast body, that improves the life-span of the machine. Many who have purchased this pump, have reported that they have lasted a decade or sometimes more.

User-friendly: As already mentioned above that the pump is compact in size, the usage of the same becomes easier. Thus, making it user-friendly.
 

Multi-washing: The same pump can spray foam, wax and water for making the car wash efficient and faster. This helps to save time and resources.
 

Efficient: Without a shadow of a doubt, the Annovi Reverberi pump is efficient to use. With the above-mentioned features, the washing pump has proved itself to be adequate and efficient.

The car washing pump is such a machine or equipment that can be called the sole of the car washer. If this machine is adequate and long-lasting, only then the car cleaning session can conclude with a happy ending. 

To learn more you can simply visit us anytime website https://www.manmachineworks.com/ 

An adequate Car wash Machine can make a difference

Investing in the car wash machines, equipment, tools, staffing, personnel, infrastructure, interiors, and so on; all are for the car wash outlet or service station. If you have invested in these, then you definitely want them to stay the same way for the longest time. Or at least gain you back the profits for the same.

To achieve that, one must try to understand one simple thing, that investing their time and money in the original machines will surely profit. Then considering the adequate ones will also make a huge difference.

One shouldn’t just hoard the machines to make the outlet looking all contemporary. Unsuitable or incompetent machines or car wash equipment may be very attractive or may seem useful at the time, but trust us, it's only taking up space.

Investing in suitable machines

Suitable or adequate or well-versed machines or car washer can make a difference to the entire tone of the car washing. As the timings and working of each machine will dictate the next move in the car wash session. If one machine breaks down or runs slower than its allotted time, then the next step will also be prolonged.

For example, if the high-pressure washer wears out or sprays water slower than the fixed time, then the further steps of shampooing and cleaning will also be delayed. This will not only cost a great amount of time being wasted but also wastage of the other resources. Thus, investing in adequate ones will surely make a difference.

The car washer:

Let’s throw some light on one of the most asked about and demanded machines in the market right now; the Automatic Car wash machine:

• M'START: Everything has a beginning and that is why with the new M’START we have decided to go back to first principles: simple design, ease of assembly, and a sober image but with the appeal, durability, and technological features expected of a 21st-century wash machine.
• M’START is a rollover designed for wash facilities with a capacity of 400 to 1200 vehicles a month and is the perfect machine for those wishing to start off in the vehicle wash business in the most profitable way. This comes in very attractive colors that can be visible from far away. The buttons and lights on the machines go all disco when turned on, which makes the car washer even more appealing. Even those people who aren’t interested in getting the car cleaned from this automatic machine will be pulled towards it.
• MNEX22: Wash and dry rollover comprising 2 vertical brushes and 1horizontal brush controlled by power transducers. Option to include different dryer combinations on the same rollover. Optional structure powder coating with a minimum thickness of 60 micros (30μ primer, 30μ color). This again is the ultimate machine for getting the highway dirt and dust off. You might have seen this machine mostly at the highway gas stations or at those service stations that are located outside the city. As this machine requires good space. And people mostly have little time for a car wash, that’s why they opt to get it done in the automatic car washer.

The Car wash machine available in the market is being replaced by their newer and latest versions on a daily basis. Hence, one must always stay on their toes while researching about the same. One should look out for the cheap ones that may promise to work efficiently but only for a short time.

To enquire or invest in car washing machines; Visit: https://www.manmachineworks.com/ or call: +91 7827954678.

What is Car Wash Equipment?

Many of you may want to know, what is the need to get the car, washed from a professional cleaning service while the house-boy can do it with a bucket of water. The answer is very simple, professional car washers do more than washing, they focus of detailing as well. Most of these companies use high-pressure washers to get their washing done in lesser time. Then the matter of the equipment arises, that what all are exactly used to get that glitz look.

The Car Wash Equipment and Machines: 

• Pressure Washers: These are used to clean the entire car much faster than the manual time. Most of these available in the market come with many optional heads and attachments such as shampoo-bottle head, etc. Most of them have ball-bearing fittings, while some good brands offer the high-pressure washers which have the tapered bearing rollers. These are well-fitted in the crankshaft which allows the washer to last longer than the others.

• Vacuum Cleaners: These are a must while running a car washer. These help in cleaning the cleaning in a way that even the tiniest piece of grain is not left behind.

• Upholstery Cleaners: The fabric of the seats has to be cleaned even more rigidly, to ensure customer satisfaction. Thus, this must be kept in mind.

• Steam Machines: There are different kinds of steam machines available with different functions. Some may exclude underbody cleaning and the wheel arches. But this too is vital in the car wash equipment category.

• Rubbing and Polishing Machines: These are used for the body of the car. As the name suggests, the rubbing and polishing of the outer-body is the base cleaning for any further actions. Any top coat application that needs to be done can only be done until this step is complete.

• Hot-and-cold high-pressure washers: As the wash demands, the setting has to adjusted. Thus, most companies have introduced this machine to save time and money.

• Robotic Underbody: This is used to wash the under-body of the car. These come in many types, like the automatic one which again have different number of nozzles and settings and a manual one as well.

• Fully-automatic car washer’s machine: These are not exactly the equipment, but an entire work-station in itself. These are big-sized machines that enable the car to be driven in them and them wash, shampoo, rinse and dry automatically.

These equipment and machines all come in different models and makes. The most important thing to keep in mind is that how efficient are they! Many may offer to save the car washing time but can wear-out sooner than their warranty. There are many accessories like the shampoo bottles, bottle holder, boom, the car washing pump and many more. Until the car is thoroughly washed and detailed to the letter, all of these and many more car washing equipment can be used. To get the best results, cleaning and maintenance of these machines is a must and should be done timely.

To learn more you can simply visit us anytime website https://www.manmachineworks.com/ or call: +91 7827954678

A Straightforward Guide to Car Wash Equipment and its Uses

The car wash equipment used in the car washing outlets or service stations can confuse, at times, in terms of their workings and features. Here is a straightforward guide to understanding their workings.

Car cleaning accessories and equipment!

The upholstery cleaner: The upholstery of the car i.e. the fabric of the seats and the carpet and all the fabric used on the roof and the sides in the interiors, gets dirty from time to time. The upholstery generally sucks up dust, dirt and any stains laid upon it. This needs to be cleaned, thoroughly, only then the interiors will be called completely clean.

• This also called the spray extraction machine and works according.
• Spray extraction is still the unsurpassed carpet/upholstery cleaning system.
• In this process, cleaning solution is sprayed into the carpet under pressure and picked up again immediately.
• The dirt is rinsed from deep down out of the carpet pile and not just from the top third.
• Carpets cleaned by spray extraction stay clean longer. With strong vacuum suction the maximum residual dampness is only 15-20%.
  
• The spray extraction process is gentle and easy on carpets.

This machine usually comes in two models: ESTRO-125 and ESTRO-250: An extractor with double stage motor that’s ideal for applications such as cleaning of car interiors & upholstery.

The Underbody Lance: This is another under-rated product in the car washing equipment category. The underbody of the car also needs to be cleaned from time to time, to stop the car from rusting from down under. Most people do understand this concept and so make it a point to wash it. But this is not a regular job that can be done by any tools. Thus, this underbody lance is made available for use.

• A right-angle wash that helps clean difficult-to-reach areas
   
• Easily removes mud and debris from the underbody
   
• Underbody wash without gantry/lift
   
• Avoids tyres alignment and balancing problem
   
• Made with high grade stainless steel for long life
   
• Task is done in less than 3 mins.

The Foam Bottle: As the name suggests, this is a bottle that can be attached to the high-pressure washer and then spray on foam on the car, directly. This is definitely the ultimate car wash equipment.

• Sleek & smooth modern design.
   
• Sight window indicates level of soap remaining.
   
• Refillable bottle reduces environmental waste.
   
• Vented large screw cap for easy refilling.
   
• Comes with a QUICK CONNECT for easy attachment.
   
• Spray pattern easily adjustable.
  

These machines and equipment may not seem important and are underrated in the market, but their functions make them useful and thus, rare to find. Car wash equipment may be ample in the market, but one must always choose and pick the originals. The price of these machines and equipment can be earned back within a short time, only. That’s why one must search for the precise ones according to their features and USPs.

To enquire more you can also visit our website https://www.manmachineworks.com/ 

What Causes the Car Washing Pump to Overheat?

Overheating of a car washing pump is caused by the pump being in bypass for too long. Bypass is the state that the washer pump is in when the trigger is not pushed in or dejected. In simpler terms, overheating is caused by leaving the pump on when you aren’t using it. Most manufacturers recommend not leaving the machine ideal for more than a few minutes.

However, after one minute in the bypass state the pressure washer pump is already really hot and can begin to cause damage once you begin to use it again. As a general rule, you should turn the machine off if you are going to leave it in the bypass state for more than 45 seconds.

Always make sure to turn the machine off before you walk away from it, even if you are only going to be gone for a few minutes. You never know what might catch your attention while you are away from pump.
 

What happens if the machine is left on, too long?

If you switch on the trigger after the machine is in bypass for too long, cold water from the water supply will reach the hot pistons and could cause the pistons to crack. If the machine overheats, it not only causes irreparable damage to the pump, but it can cause substantial damage to the entire car washer.

The temperature in the pressure washer can reach well over 100 degrees Fahrenheit when it is left in the ideal state. That creates a safety risk for the user because temperatures that high can seriously harm you and cause really bad burns.

Keep yourself and everyone else around safe by making sure that when the washer pump is not in use, it is switched off so that it doesn’t overheat.

There are a few things that you can do to increase the life of the car washing pump.
 

• Learn about the different parts of the pump.
  
• Turn the machine off when not in use.
  
• Make sure that the correct water supply is being used when the machine is in use.
  
• Use the unloader valve properly.
• Always wear closed-toe shoes and gear.
• Clean all the equipment when ideal and cooled down.

Although the Annovi Reverberi car washing pump machine have a brass head and promise to last a good amount of time, the proper care of the machine has to be taken.

One must be always clear that the pressure pump is not like the garden hose and will have an extremely high-pressured power of water. This will get the car washer to throw water that may sometimes not be handled well. To avoid any such accidents while using the pump, make sure to follow the instructions mentioned above.

The car washers available in the market, all have a single motive to facilitate the car wash session. To do so, the machinery has to be treated with care and as per the instruction manual.

To enquire more or to book these machines you can also visit our website https://www.manmachineworks.com/

The Steam Car Washer works Par Excellence

The car wash equipment in the market is available for car washing outlets, service stations, workshops, or repair shops to make the most of it and service to the best advantage. The steam car washer is among those machines.

As the name suggests, the steam wash machine liberates the steam instead of water to clean the car and its vital parts. This guarantees that the car’s engine, upholstery, plastic parts, and so on can be cleaned only with steam. This ensures the owner of the car to trust the car washing outlet.

How to use the Steam Car Washer and Wax Machine

  

 

1.  If you have chosen the FX1 (diesel mode), then you must first lock in the breaks at the bottom before beginning.
2.  Pour Diesel into the Diesel Tank.
3.  Pour clean water in the Water Tank.
4.  In separate container, pre-mix wax with water in the ratio of 1:7, and pour in the Wax Tank.
5.  Connect the steam hose with the machine and fastening may be a little stiff because of the new packing.
6. Connect the power cord to the outlet and turn in the main switch on.
7. Turn Operation Switch On.
8. Turn the wax switch on and adjusting Steam Moisture Level.
9. Watch the pressure gauge reaches the proper amount of pressure (6-8 bar) in 1-2 minutes.
10. Now, you can wash cars by simply pulling the trigger of a steam gun.
11. When the pressure gauge reaches to 8 bar and the burner is stopped, you can start the car wash.
12.  If there is an interval between jobs, turn the operation switch off. If not, the machine will supply an excessive amount of water in the chamber to retain adequate pressure.
13. The machine will be able to make steam more quickly, the next time it turned on.

With its easy to move wheels at the bottom, allow it to be moved around with ease. The weight of the machine won’t be noticed with these wheels. The machine is self-sustaining but needs caution and basic training to use it to the fullest.

The Poseidon Steam Wash Machine:

Designed to obtain a steam supply in constant use with the maximum working pressure up to 9 bars, its working efficiency is guaranteed by a powerful suction unit with the two two-stage motors. In addition to the steam and suction-steam function, the Steam car washer is equipped with the "detergent dispensing with separate compartment" function.

The Poseidon is also a revolutionary machine that can do the trick in a short span of time.

These steam wash machines work at par excellence, as they have come to us from the future. These machines are designed very cleverly to fit into car washing outlets and workshops. One can easily choose from the different models as per the space of their outlets. All the steam washer machines come with easy wheels on the bottom for the best efficiency.

To place an order for the steam car washer, or enquire more: Visit: https://www.manmachineworks.com/.