Compared to hand
washing car pressure washer makes
the cleaning process easier with the use of less water compared to the hosepipe.
Rinse off grit and grime from the top layer. When using machines with jet variable
sprays adjust this for spraying 5-8cm approximately. This way it has enough
strength to clean your car without damaging the paintwork. Use the less powerful
and slightly wide setting for lights, windows, and various fragile areas of the
car to ensure safe cleaning. If you want, it is possible to apply detergent, and
for this set the nozzle of the washer to the least powerful and the widest.
You should pressure wash the car on the concrete instead of on a gravel surface, for obvious reasons. This way you can avoid the flying stones hitting paintwork.
Directing the strong spray on the old tires is not a good idea as this might make it explode causing serious accidents.
Directly pointing spray on panel gaps for an extended time might cause possible leaks. After spraying, you should check the interiors to find any doors with leaking seals.
Car washer machine |
You might as
well remove this altogether and coat the car surface in the detergent layer. For some
time, leave it be so that the magic starts to happen but make sure that it does
not dry up or there will be blemishes present for buffing out later. It is possible to loosen even the highly
stubborn grease and dirt with the car brush. Just make sure to clean the wheels
last after the paintwork or the brush picks grit and small stones from the
wheel area to rub this against the paint. It leads to scratching of the surface
that you would not want.
After using the
brush, make sure to rinse this thoroughly for removing the grit completely. Now it
is time to use the pressure car washer using a slightly strong setting for painting compared to glass areas. In case, a variable nozzle is not present for adjusting spray width and power, the easy
thing to do would be to stand away from your car. The safe distance is one
meter as this helps to prevent damage of any kind. When it comes to effective
cleaning of the vehicle you have to find a washer having a long hose. Ideally, it
should be 5m long at least. This way you need not move this around your car.
Find a pressure washer
having a jet variable nozzle setting so that cleaning different car parts becomes
a safe endeavor and no damage occurs. The washer having nozzle attachment allows
the users to change the directions of the spray as needed. For example, it might be
possible to angle the nozzle upwards for cleaning wheel arch interiors. Washers
having foamier attachable bottles makes this easy to use compared to containers
for carrying with you. To get the best results with your pressure washing chores
take care of the following:
·
Tornado or the rotary nozzle might not
be a good idea during car cleaning since this proves to be too strong and
possibly damages paintwork.
·
When turning on the washer watch the
initial water burst as this is quite strong and might catch you unawares. A
better idea is to point the nozzle towards the ground first.
You should pressure wash the car on the concrete instead of on a gravel surface, for obvious reasons. This way you can avoid the flying stones hitting paintwork.
·
Use of strong spray upon chipped paint
areas is going to strip additional paint away. Remember this point when using a car pressure washer.
Directing the strong spray on the old tires is not a good idea as this might make it explode causing serious accidents.
Directly pointing spray on panel gaps for an extended time might cause possible leaks. After spraying, you should check the interiors to find any doors with leaking seals.