You have purchased the best car washers and are now ready to clean your dirty vehicle. You are quite excited and cannot wait to try out this new buy. Go ahead but before you do so make sure that, you know how to get the optimal results. Even the best washer might not work, and do some damage if you flout the rules. Manufacturer’s instructions and specifications are quite important so before you go ahead and try that new machine go through it thoroughly. This way you can have optimal cleaning results and your car will have the restored showroom shine.
 |
| Car Wash |
Here are some pointers to get you on the right track:
Aim away and start spraying: the first pressure jet might not be the same as constant flow and first jets tend to be quite powerful, going beyond the expectations of first-time users. This way damage is possible so the experts suggest that you take your aim at the ground right beside the car and start spraying. Now you might move to the vehicle itself to start with the washing.
Careful aiming is the way to go: even while aiming to the ground you cannot let your guard down since the water might dislodge a stone and aim this straight to the car! Look first find out where you aim and then go ahead. Make sure that loose stones are not present nearby.
Beware of the chipped paint: buy the best car washers and use them right as well. An area on the vehicle might contain chipped paint so the use of pressure on this area would only further the damage. For small chips, it is a good idea to consider repainting before you apply a pressure wash machine.
Never hold it directly against the car: you should not do this even when you want to remove tough dirt or bug splatter. Instead, use a brush for initial cleaning. Holding close might lead to damaged paint that you do not want.
Soak the car and start at a distance: before removing dirt or using soap soak the vehicle fully as this loosens the dirt with optimal cleaning results. Go from top to bottom: this is the best direction to go and means that you tackle the cleaning of the tires last. This way the dirt or gravel from the lower portions do not reach the top when using the car washers.
Aim away and start spraying: the first pressure jet might not be the same as constant flow and first jets tend to be quite powerful, going beyond the expectations of first-time users. This way damage is possible so the experts suggest that you take your aim at the ground right beside the car and start spraying. Now you might move to the vehicle itself to start with the washing.
Careful aiming is the way to go: even while aiming to the ground you cannot let your guard down since the water might dislodge a stone and aim this straight to the car! Look first find out where you aim and then go ahead. Make sure that loose stones are not present nearby.
Beware of the chipped paint: buy the best car washers and use them right as well. An area on the vehicle might contain chipped paint so the use of pressure on this area would only further the damage. For small chips, it is a good idea to consider repainting before you apply a pressure wash machine.
Never hold it directly against the car: you should not do this even when you want to remove tough dirt or bug splatter. Instead, use a brush for initial cleaning. Holding close might lead to damaged paint that you do not want.
Soak the car and start at a distance: before removing dirt or using soap soak the vehicle fully as this loosens the dirt with optimal cleaning results. Go from top to bottom: this is the best direction to go and means that you tackle the cleaning of the tires last. This way the dirt or gravel from the lower portions do not reach the top when using the car washers.
No comments:
Post a Comment